Adhesive electrodes TENS - 50x90mm

Self-adhesive TENS electrodes 50 × 90 mm, 4 pcs

Self-adhesive TENS electrodes measuring 50 × 90 mm with a 2 mm pin connector. The electrodes are designed for good adhesion and even conductivity and fit compatible TENS devices with a 2 mm connection, for example Cefar Primo Pro.

Each pack contains 4 self-adhesive electrodes. The self-adhesive surface makes the electrodes easy to apply without extra gel or tape.

• 4 pcs per pack
• 50×90 mm size
• 2 mm pin connector
• Self-adhesive and reusable

Good adhesion and conductivity

The electrodes are flexible and follow the contours of the body, providing good skin contact even on areas where the surface is not completely flat. The conductive surface helps ensure an even transfer of the electrical impulses from the TENS device.

The electrodes can be reused several times with correct use and storage. Their lifespan varies depending on factors such as skin type, frequency of use and how the electrodes are stored.

Size: 50 × 90 mm

Connector: 2 mm pin

Quantity: 4 electrodes per pack

Type: Self-adhesive and reusable

Tips for use and longer life

• Clean the skin with soap and water before use and let it dry thoroughly. Avoid lotion, massage oil, skin cream and similar products on the area where the electrodes will be placed.
• Carefully remove the electrode from the plastic backing by holding its edge. Do not pull on the cable or the connector.
• After use, place the electrodes back on the plastic backing and store them in the supplied storage bag. Seal the bag tightly to prevent the electrodes from drying out.
• If the self-adhesive surface starts to dry out, it can be carefully moistened with a few drops of water. Do not soak or immerse the electrodes in water.
• Replace the electrodes when the adhesion or function has deteriorated or when they show clear signs of wear.

• elektrod-placering.pdf